Digital Designs Dual 15" and amplifier package with 7500w!!!!
If you have BASS tattooed across your knuckles and arn't happy if you cant set car alarms off in the next town then this package is for you.
2 x 9915A (ESP) 15" subwoofers and an M5 Amplfier.
I'm sure they don't need any introduction but a brief lowdown on the equipment -
The 9900s are the go to subwoofers for the demanding bassaholic with a profound interest in physics. Entertaining minds will revel in the endless system design possibilities deliverable with these precision low-frequency devices.
Originally coined The Beast, the 9900s first appeared on the market in the early 2000s. It took a brief hiatus, but now itís back and more beastly than ever. The latest iteration was developed in response to the recent explosion in ultra-low-frequency music. These subwoofers were designed to provide long-term power handling, with accuracy, and high excursion capabilities. Itís been optimized for a 1500 Ė 2500 watt power band with the ability able to handle bursts of up to 10,000 watts. One look at the 9900 motor and you see why we call it the beast. It boasts 3 inches of magnet cross-section, over a 10″ OD, and weighs in at 70 pounds (motor only). The traditionally tight DD magnet gap drives a 4″ flat wound aluminum voice coil to a peak excursion in excess of 3 inches while keeping enough turns in the gap to maintain power and control.
The 9900 Series features our Evolution Subwoofer Package (ESP). ESP equipped drivers sport larger diameter suspensions and deeper frames than standard subs and exclusive surround and cone designs. ESP subs are truly built to maximize performance in their designated size class.
The 9900 Series comes standard with an oversized dry finish black composite dust cap, red logo, and treated pulp cone, but it can be optioned out with alternative composite dust caps, composite cones, powder coated frames, supercharging, and a multitude of logo options to give your sub a personalized look and/or added performance for a specific application.
Customiseable too - http://ddaudio.com/sub-customizer/
Please email us your specs for an exact quote.
If youíre ready to take your system to the next level then the M5 Amplifier is the tool for you. The M5 is based on the circuitry of our world renowned Z2-LV amps and features a 6 transformer power supply. We designed the M5 to produce massive output with real-world input voltage levels. This amp can deliver over 6,500 Watts at 12V, over 9,000 Watts at 14.4v, and has a dynamic power rating of over 10,000 Watts! To make the M5 even sweeter, our M Series heatsink enables the M5 to have one of the smallest footprints in its power class while maintaining maximum heat dissipation. This makes installing one, or more of these monster amps as easy as possible.
For even more installation ease, and upgradeability the M5 features Strap and Link mode. When using one of these modes youíre able to use multiple M5 in an install, and control the Strapped or Linked amplifiers level settings from the main amp. Youíll also be able to us a single remote gain to control all Strapped or Linked amps.
The M5 also comes with the VM-RMT remote control. The VM-RMT is a mini amplifier diagnostic center thatís able to mount within arms reach for real-time performance monitoring and adjustments. From this remote you have fine gain control, amplifier input voltage monitoring, and output clipping monitoring.
WARNING: The M5 is designed to work off real world input voltage levels (12-14v), but you absolutely will still need an upgraded charging system to realize the true potential of this beast. At maximum output level the M5 can require over 1000 amps of sustained/stable current. Failure to provide a stable power supply to the amp at the desired output level will often result in amplifier failure.
***please note the subwoofers can take up to 6 weeks to arrive, especially if custom built to order***
|Test Voltage 12 / 14.4|
|Cont Wattage @ 4ohm N/A|
|Cont Wattage @ 2ohm N/A|
|Cont Wattage @ 1ohm 5,200x1@12V / 7,email@example.comV|
|Dynamic Wattage 10,000x1|
|Max Current Draw - Amperage 800|
|S/N Ratio >100dB|
|Input Voltage Sensitivity 5 - 0.15|
|Pass-Through Output Yes|
|Remote Subwoofer Control Yes|
|Power Wire Guage In 2 x 0|
|Speaker Wire Gauge Out 10|
|Dimensions||in 27.55 x 9.05 x 2.57|
|Dimensions||mm 700 x 230 x 65.5|
|Shipping Weight - lbs 37|